CGCXJ - Z SPAR TOPSIDE ENAMEL 100 GLOSS WHITE

  • MSDS: CGCXJ
  • Manufacturer: KOP COAT INC
  • Product Name: Z SPAR TOPSIDE ENAMEL 100 GLOSS WHITE
  • National Stock Number: 8010-00N082436
Product Identification

Product ID:Z SPAR TOPSIDE ENAMEL 100 GLOSS WHITE
MSDS Date:08/10/1995
FSC:8010
NIIN:00N082436
MSDS Number: CGCXJ

Responsible Party
KOP-COAT INC
5431 DISTRICT AVE
VERNON, CA 90040
US

Emergency Phone: 800-548-0489;800-424-9300(CHEMTREC)

Info Phone: 800-932-2239;213-560-5700

Preparer: L BRIGGS

Cage: 00297

Contractor
KOP-COAT INC
UNKNOW PITTSBURGH, PA 15219-1818 US

Telephone: 800-553-5631, CHEMTREC 800-424-9300

Cage: KXPCX

Ingredients

SILICA, AMORPHOUS, PRECIPITATED AND GEL; (AMORPHOUS SILICA

CAS: 112926-00-8

RTECS: VV7315000

Fraction By Weight: 1-5%

OSHA PEL N/K

ACGIH TLV: N/K


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


NAPHTHA, HEAVY ALKYLATE; (SOLVENT NAPHTHA (PETROL) HEAVY

CAS: 64741-65-7

Fraction By Weight: 20-25%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


SOLVENT NAPHTHA, PETROLEUM, MEDIUM ALIPHATIC; (PETROLEUM

CAS: 64742-88-7

RTECS: WF3450000

Fraction By Weight: 5-10%

OSHA PEL 400 PPM (MFR)

ACGIH TLV: 400 PPM (MFR)


SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (PETROLEUM

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 1-5%

OSHA PEL 400 PPM (MFR)

ACGIH TLV: 400 PPM (MFR)


XYLENE (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 70%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CUMENE (SARA 313) (CERCLA)

CAS: 98-82-8

RTECS: GR8575000

Fraction By Weight: 3%

OSHA PEL 50 PPM, S

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TRIMETHYLBENZENE

CAS: 2551-14-5

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K


DO

RTECS: 9999999ZZ


MED ATTN IMMED. NEVER GIVE ANYTHING BY MOUTH TO AN

RTECS: 9999999ZZ


FOR EFTS FROM OVEREXP TO THIS MATL. TREATMENT

RTECS: 9999999ZZ


KEEP AWAY FROM HEAT & OPEN FLAME. IF POST

RTECS: 9999999ZZ


APPLICATION IS MADE, "EXPOS LIMS" IN INGS SECTION

RTECS: 9999999ZZ


& AFTER APPLICATION. FOLLOW RESP MFR'S

RTECS: 9999999ZZ


PROT PROGRAM THAT MEETS 1910.134 & ANSI Z88.2 REQS

RTECS: 9999999ZZ


DEPENDING ON WORKING CNDTNS, I.E., CONT

RTECS: 9999999ZZ


NECK COVER, APRONS, JACKETS, PANTS, COVERALLS,

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: DIRECT CONT W/LIQ/VAP MAY
CAUSE IRRIT. SKIN: PRLNG/RPTD CONT MAY CAUSE DEFAT & DRYING WHICH
MAY RSLT IN IRRIT & DERM (RASH). MAY BE ABSORBED THRU SKIN. INHAL:
AVOID BRTHG VAPS/MISTS. HIGH CONCS MAY LEAD TO CNS EFTS (DROW,
DIZZ, NAUS, HDCH). PRLNG/RPTD INHAL & INGEST MAY CAUSE DELAYED
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: INJURY INVOLVING KIDNEYS & BLOOD.
INGEST: IRRITATING TO NOSE, THROAT & RESP TRACT. MAY CAUSE VOMIT.
ASPIR OF THIS PROD INTO LUNGS MAY CAUSE CHEM PNEUMIT WHICH CAN BE
FATAL.
Medical Cond Aggravated by Exposure:INDIVIDUALS W/PREEXISTING DISEASE
IN/HISTORY OF AILMENTS INVOLVING SKIN, EYE, RESP TRACT, LIVER,
KIDNEY, CNS ARE AT GREATER THAN NORM RISK OF DEVELOPING ADVERSE
EFTS WHEN EXPOSED TO THIS MATL.

First Aid

First Aid:EYES: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. IF
IRRIT PERSISTS, GET MED ATTN IMMED. SKIN: REMOVE CONTAM CLTHG. WASH
THORO W/SOAP & WATER. IF REDNESS, ITCH, BURNING/OTHER SYMPS
DEVELOP/PERS IST, GET MED ATTN. WASH CONTAM CLTHG BEFORE REUSE.
INHAL: IF BRTHG IS DFCLT, OBTAIN FRESH AIR. IF BRTHG HAS STOPPED
HAVE TRAINED PERS ADMIN ARTF RESP, PREF MOUTH-TO-MOUTH. IF BRTHG IS
DFCLT, (ING 10)

Fire Fighting

Flash Point Method:TCC
Flash Point:102F,39C
Extinguishing Media:USE DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR
FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . USE WATER TO COOL FIRE-EXPOSED CONTAINERS, PROTECT
PERSONNEL.
Unusual Fire/Explosion Hazard:CAN RELEASE VAPS THAT FORM EXPLO MIXTS.
VAPS CAN TRAVEL TO SOURCE OF IGNIT & FLASH BACK. CLSD CONTRS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT (FIRE). (SUP DAT)

Accidental Release

Spill Release Procedures:STOP SPILL/LEAK IF NO RISK INVOLVED. AVOID
BREATHING VAPORS. VENTILATE AREA. USE AN INERT ABSORBENT TO
COMPLETE A CLEAN-UP. DISPOSE OF CONTAMINATED ABSORBENT, CONTAINER
AND UNUSED CONTENTS IN ACCORDAN CE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PRLNG/RPTD BRTHG OF VAPS,
MISTS/FUMES. DO NOT GET ON SKIN, IN EYES/ON CLTHG. SPRAY PAINT
I/A/W OSHA 29 CFR 1910.107. USE W/ADEQ VENT.
Other Precautions:STORE IN AREAS/BLDGS DESIGNED TO COMPLY W/OSHA
1910.106. KEEP IN CLSD, LABELED CONTR W/IN COOL (WELL-SHADED), DRY,
VENTILATED AREA. PROTECT FROM PHYSICAL DMG. KEEP CONTR CLSD WHEN
MATL IS NOT IN USE. MAINTAIN GOOD HOUSEKEEPING. (ING 13)

Exposure Controls

Respiratory Protection:ENSURE FRESH AIR ENTRY DURING APPLICATION &
DRYING. IF YOU EXPERIENCE EYE WATERING, HDCH/DIZZ OR IF AIR
MONITORING DEMONSTRATES VAP LEVELS ARE ABOVE APPLIC LIMITS, WEAR
APPROP, PROPERLY FITTED RESP (N IOSH APPRVD/EQUIVALENT) DURING (ING
15)
Ventilation:VENT IS NORMALLY REQUIRED WHEN HANDLING/USING THIS PROD TO
KEEP EXPOSURE TO AIRBORNE CONTAMINANTS BELOW EXPOSURE LIMITS.
Protective Gloves:HEAVY DUTY NEOPRENE OR EQUAL.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYEWASH & DELUGE
SHOWER . WEAR INDUSTRIAL-TYPE WORK CLOTHING & SAFETY FOOTWEAR. (ING
17)
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXPLO HAZ: TOX VAPS MAY BE GIVEN OFF IN FIRE. "EMPTY" CONTRS RETAIN
PROD RESIDUE (LIQ &/OR VAP) & CAN BE DANGEROUS. DO NOT PRESSURIZE,
CUT, WELD, BRAZE, SOLDER, DRILL, GRIND/EXPOSE SUCH CONTRS TO HEAT ,
FLAME, SPARKS, STATIC ELEC/OTHER SOURCES OF IGNIT; THEY MAY EXPLODE
& CAUSE INJURY/DEATH.

Chemical Properties

Vapor Density:>1
Spec Gravity:>1
VOC Pounds/Gallon:460
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability

Stability Indicator/Materials to Avoid:NO
AVOID OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID HEAT, SPARKS, AND OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE UPON
THERMAL DECOMPOSITION.

Disposal

Waste Disposal Methods:THIS PRODUCT AS SUPPLIED IS A USEPA DEFINED
IGNITABLE HAZARDOUS WASTE. DISPOSE OF UNUSABLE PRODUCT AS A
HAZARDOUS WASTE (D001) IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.